Successfully blast even the most awkward of components!



The RH Series of Rotating Hook blasting systems is the perfect option for high volume and mixed geometry blast operations. It has a compact design and high-quality German manufactured electronic PLC control componentry. Available as monorail straight-through systems, or as Y-track in and out versions, exceptional rates of productivity can be acheived by using a single operative. 

Long-lasting steel or stainless steel shot is used to achieve the correct blast pattern and these abrasives offer a high recycle, low-cost, energy efficient method of removing casting sand and scale, existing coatings and all manner of contaminants to provide the right finish for your final coating. 


Ranging from 0.5 - 3m dia


Ranging from 1m to 8m


Ranging from 5kw wheels to 22kw wheels


can be designed to any configuration required


Upgrade with the KUBE RH Series and blast hundreds of small parts simultaneously!

Highly-flexible operations

More than 100 programming options available. (additional programme memory available if required)

Easily work with large, geometrically complex items.

Discover more about KUBE RH Series by the team of experts themselves

Discover RH Series

Featured Technology

  • KUBE Tri-layer
  • Dust Collection
KUBE Tri-layer

KUBE Tri-layer

Triple-layer blast chamber system is available. 

Our standard machines have double thickness (8mm) manganese wear plates, an 8mm manganese casing, and then if you choose the Tri-Layer option you can choose between either a 6mm construction steel outer or an 8mm manganese additional outer.

Dust Collection

Dust Collection

Having powerful and efficient extraction is essential to the ongoing cleanliness of your operation

Finely controlled airspeeds remove the maximum dust in the minimum time, with the modern cartridge system being constantly cleaned with a reverse pulse air jet during operation.

HEPA filtration is also available to the outlet for situations where externally ducted extraction is not possible.


KUBE RH Series at a glance

High capacity, slimline belt and bucket elevator system 
Quietly and efficiently removes used abrasive to the media cleaning system for recycling
2 to 8 wheels depending on system size 
Component geometry and required blast speed
Modern, energy efficient dust extraction system 
Remove any dust and contaminants removed or produced during the blast process
Wide range of overhead winch loading capabilities

Right from 500kg through to 15 tonne capacity

State of the art, auto-balance throwing wheels 
Providing low energy and quiet continuous operation

Get in touch with our brand representatives for more information regarding KUBE RH Series

Bespoke Options

Contact our team for additional information

5kw to 22kw motor versions available for the shot throwing wheels

Variable speed console available for more delicate component applications

Project specific overhead infeed and outfeed rail designs

Single or twin entry versions available

Bespoke cabinet sizing

Wide and innovative range of component carrier jigs available

Bespoke overhead rail configuration, including:
  1. monorail double door 
  2. straight through systems for in-line applications 
  3. or Y-track single door versions for both on and off-line applications


Standard 2 year warranty

3 and 5 year warranties also available.

Servicing Packages

Starting from 2, 3, and up to 5-year servicing packages available.

Delivery and commissioning

are always included within our price.

Make an Enquiry

The KUBE RH Series of hang & spin blast systems are individually specified according to the needs of each factory. An initial phone call or online meeting determines your overall application and then a follow-up meeting is held at your factory to look at your needs in detail, and based on this to present an initial version of our solution.  

Subsequent discussions will fine-tune this specification to exactly what you require and the technical specification for your machine is collated at this point, ready for the build.

Typically companies provide their component drawings in 3D during the design process of their RH series machine, and a predictive program will throw abrasive at the components virtually, producing a heatmap of areas that are either overblasted or underblasted. This then allows the chamber of the machine to be designed and the throwing wheels positioned for maximum effect, prior to the build of the blast system.